The BEAM 8' Pigtail Cord and Cuff Kit, part P-CCEH, is a replacement and conversion kit for electric central vacuum hoses with a corded wall-end power connection.

Use this kit to replace a damaged cord assembly or convert a two-prong direct-connect wall-end hose assembly to a pigtail cord setup. The 8' cord plugs into a nearby standard household outlet so a compatible electric powerhead can receive high-voltage power.

The hose cuff continues to carry the low-voltage central vacuum activation circuit while the pigtail cord provides the separate high-voltage feed. This kit is for electric hoses and is not intended for suction-only hose setups.

Included are the wall-end cuff, 8' cord with molded-in fuse, one male pin connection, one female slate connection, and instructions. Older hoses with two male pins may require the included female slate connection to be spliced into one hose wire under the cuff.

Why Choose This Product?
- 8' pigtail cord reaches a nearby standard household outlet for power.
- Replaces a damaged wall-end cord assembly on electric central vacuum hoses.
- Converts a two-prong direct-connect hose end to a corded pigtail wall-end setup.
- Includes both the wall-end cuff and electrical connection pieces needed for the repair.
- Cord assembly includes a molded-in fuse for built-in circuit protection.
- Supports electric powerheads while the hose cuff still handles low-voltage vacuum activation.

Specifications
- Brand: BEAM
- Part Number / SKU: P-CCEH
- Product Type: Electric central vacuum hose pigtail cord and cuff kit
- Cord Length: 8'
- Connection Type: Pigtail cord wall-end hose connection
- Electrical Use: Supplies high-voltage power to compatible electric powerheads through the hose
- Included Fuse: Molded-in fuse
- Included Components: 8' pigtail cord, wall-end cuff, one male pin connection, one female slate connection, instructions
- Status: Current
- Swiss Boy Category: 618
- Price Point: $20.00

Compatibility List
No specific model-number compatibility list was verified from the provided product data.

Use Case
Use the BEAM P-CCEH kit when an electric central vacuum hose has a damaged wall-end pigtail cord or when converting a compatible two-prong direct-connect wall-end hose assembly to a corded pigtail configuration. The 8' cord requires a standard household outlet within reach of the wall inlet.

For older electric hoses with two male pins, use the included female slate connection as directed in the instructions. If the hose wiring, cuff style, or pin layout is unclear, contact Swiss Boy Vacuum in Bountiful Utah. Swiss Boy Vacuum has served customers since 1963. Call 801-298-3656.