The Beam Prism 30-foot Wireless Hose (Part 50700) is the original-style wireless electric hose designed for Beam Prism central vacuum systems, operating on the 433MHz frequency used by older Prism-generation units. With a 30-foot length and wireless on/off control, this hose lets you start and stop your central vacuum unit directly from the handle - no low-voltage wires are required at the wall inlet, and no wiring runs through the hose body itself.

The hose features a durable crush-resistant body with a comfortable handle housing the wireless transmitter and activation controls. The 433MHz wireless signal communicates with the compatible Beam Prism automitter receiver, triggering the central vacuum unit to power on when cleaning begins and off when the handle control is engaged. Because this is a wireless hose with no electrical connections at the cuff, it is mechanically simple with fewer points of failure than traditional electric hoses.

The 433MHz frequency is specific to the older Prism hose generation, meaning this hose is not interchangeable with newer Beam wireless systems that operate on different frequencies. The hose requires a Beam Prism 433MHz automitter receiver (Part 100579, sold separately) installed at the central vacuum power unit to function. It is compatible with non-electric floor tools, turbo brush heads, and standard Beam attachment sets.

Swiss Boy Vacuum stocks this legacy Beam Prism part for customers maintaining older Prism central vacuum systems. Our team can help verify whether your Prism system uses the 433MHz frequency and confirm that both this hose and the correct automitter are in stock. Replacing a worn Prism hose is a cost-effective way to extend the life of an otherwise well-functioning system.

Specifications

Brand: Beam

Part Number: 50700

SKU: 50700

Hose Length: 30 feet

Type: Wireless (no low-voltage pins, no 110V)

Wireless Frequency: 433MHz

Style: Old Style / Prism Generation

Required Receiver: Beam Prism Automitter 433MHz, Part 100579 (sold separately)

Compatibility

Beam Prism Central Vacuum Systems: Original 433MHz wireless generation only. Requires compatible 433MHz Prism automitter receiver (Part 100579) at the power unit. Not compatible with newer Beam wireless systems using different frequencies.

Use Case

This hose is the correct replacement for homeowners with an older-generation Beam Prism wireless central vacuum system. If your existing Prism hose has cracked, lost suction, or the wireless trigger has stopped functioning, Part 50700 restores full wireless convenience without requiring a full system upgrade.