The Beam Prism Old Style Wireless Repeater (433MHz) is a range-extending accessory for first-generation Beam Prism wireless central vacuum systems. In larger homes or homes with thick walls and multiple floors, the wireless signal from a 433MHz Prism hose may not reliably reach the central vacuum power unit's automitter receiver on every activation attempt. The wireless repeater picks up the 433MHz signal and re-broadcasts it, bridging the gap between hose locations and the automitter to ensure reliable activation from anywhere in the home.

The repeater plugs into a standard 120V outlet and is positioned in a central location between the farthest inlet and the automitter receiver to maximize signal coverage. Installation is straightforward - plug in, pair with your Prism automitter, and the repeater automatically relays activation signals as needed. The 433MHz frequency of this old-style repeater is specific to the first generation of Beam Prism wireless components, and it is not compatible with the newer 915MHz Prism system.

Swiss Boy also carries the Swiss Boy.biz listing of the 915MHz Beam Prism wireless repeater (Part 100633) for customers with newer-generation Prism systems. If you are unsure which generation your Prism system uses - 433MHz or 915MHz - our team can help identify your system from the part numbers on your automitter receiver or hose. The two generations are not interchangeable.

Swiss Boy Vacuum stocks both generations of Beam Prism wireless components to support customers maintaining legacy Prism systems. Whether your repeater has failed after years of use, or you are expanding wireless coverage to a newly added inlet, the 433MHz repeater restores reliable whole-home wireless vacuum activation in your first-generation Prism installation. Contact Swiss Boy for current stock status and ordering.

Specifications

Brand: Beam

Type: Wireless range repeater

Wireless Frequency: 433MHz (old style / first generation)

Power: 120V (standard outlet plug-in)

Installation: Plug-in, between hose locations and automitter

Compatible Automitter: Beam Prism 433MHz automitter, Part 100579

Compatible Hose: Beam Prism 433MHz wireless hose, Part 50700

Compatibility

Beam Prism 433MHz First-Generation Wireless Systems: Compatible with Beam Prism 433MHz automitter (Part 100579) and 433MHz wireless hoses (Part 50700). NOT compatible with Beam Prism 915MHz systems (Parts 100631, 100598, 100633). These two generations operate on different frequencies and cannot share components.

Use Case

The 433MHz repeater is the right solution for first-generation Beam Prism wireless system owners in larger homes where the wireless signal from remote inlets does not reliably reach the automitter. Adding a repeater in a central hallway or mid-floor location restores consistent whole-home wireless activation without any piping or wiring changes.